Civil Engineering

FLAGON® BT 2.00 mm geomembrane is a non-reinforced synthetic single-ply membrane made by co-extrusion from translucent PVC-P.

ANTIROCK® ASP SR membrane is a torchable waterproofing membrane made from polymer modified bitumen (SBS elastomer).

FLAGON® GEOP geomembrane is a synthetic membrane made from TPO by co-extrusion.

FLAGON® AT geomembrane is a PVC-P membrane for drinking water tanks.

FLAGON® CSL geomembrane is a synthetic membrane made by co-extrusion from plasticised PVC.

ANTIROCK® BRIDGE is a torchable waterproofing membrane made from polymer modified bitumen (SBS elastomer) with a nonwoven polyester reinforcement mesh (250g/m²).

FLAGON® TPO PZ/SL geomembrane is a non-reinforced synthetic multi-ply membrane made by co-extrusion from TPO.

FLAGON® BSL is a synthetic membrane of plasticised PVC manufactured by coextrusion which enables the production of a single layer membrane, each of the two surfaces being a different colour.

ELASTOCOL® 500 TP primer is a homogeneous mixture of bitumen and solvents in liquid form, black in colour.

GLACIVAP® is a ready-to-use cold-applied pore filler primer used for bridge decks with bituminous waterproofing membranes.

EP5 PERFORMA membrane is a torchable waterproofing membrane made from polymer modified bitumen (SBS elastomer) with a non-woven polyester reinforcement mesh (250g/m²).  

ANTIROCK® P is a bituminous membrane under asphalt for civil engineering works.

Alsan® Voile Flashing is a flexible and elastic reinforcement made with a polyurethane foil between two polyester fleeces, to be used with Alsan® Flashing and Alsan® Flashing Jardin waterproofing systems.

ELASTOPHENE® FLAM 25 is a flexible SBS elastomeric bitumen waterproofing membrane with a glass fleece reinforcement. Both sides are covered by a thermofusible film.

FLASHING® TP is a brown single-component bitumen-polyurethane resin in a solvent-borne thixotropic form. After the solvents have evaporated, the resin forms a film about 1 mm thick, sticky to the touch and brown in colour.  

FLAGON® GEOP AT geomembrane is a synthetic membrane made from TPO by co-extrusion.

EP5 PERFORMA PL AR membrane is a torchable waterproofing membrane made from polymer modified bitumen (SBS elastomer) with a non-woven polyester reinforcement mesh (250 g/m²).

CURFER is a resin composed mainly of high acrylic polymers.

FLAGON® PM/SL geomembrane is a non-reinforced, synthetic membrane made by co-extrusion from TPO.

PARUVEL is a white waterborne acrylic coating used on bituminous products, highly resistant to UV light, specially adapted to bituminous products.