Thermal insulation

EFIMUR® is a rigid polyurethane thermal insulation panel with multilayer facing on its two faces used for buildings.

STICK THERMOFOIL is a bridging strip adhesive aluminized intended to ensure airtightness and water vapor the end of the width and to the periphery.

EFIGREEN® ITE is a rigid polyisocyanurate (PIR) thermal insulation panel with embossed aluminium facing on its two faces used for buildings.

AIR'SOPRASEAL® INT is a multi-purpose, solvent free, acrylic sealant.

High-performance thermal and sound insulation, UNIVERCELL® CONFORT LOOSE- fill comes in the form of cellulose fibres, made from recycled paper, sorted and ground, then treated to resist fire and mildew.

UNIVERCELL® CONFORT PANELS are thermal insulation panels for buildings, based on semi- rigid cellulose wadding panels with different thickness.

PERLIBETON® is made of calibrated and expanded perlite grains, used for lightweight concrete.

EFIGREEN® DUO is a rigid polyurethane thermal insulation panel with a composite facing on its two faces.

ALUFLEX is a reflective vapour barrier with a high resistance to tearing.

SOPRAVAP® KRAFT is a vapour barrier / vapour retarder made of reinforced kraft. It can be laid either on roof in traditional way on discontinuous support either on wall onto continuous or discontinuous support.

EFIGREEN® A is a rigid polyurethane (PUR) thermal insulation panel with a micro-perforated mineral facing on its two faces used for buildings.

AIR'SOPRASEAL® EXT is a non-crosslinkable sealant, synthetic rubber-based and plasticized with bitumen, solvent-based.

EFIGREEN® ALU is a rigid polyurethane thermal insulation panel with a composite facing on its two faces.

EFIGREEN® ACIER is a rigid polyisocyanurate thermal insulation panel with embossed aluminium facing on its two faces.

SOPRAVAP® VISIO is a translucent vapour barrier / vapour retarder screen with a high resistance to tearing. It can be installed, either on the roof in the traditional way on discontinuous substrate, either on wall on continuous or discontinuous substrate.

TMS® is a rigid polyurethane (PUR) thermal insulation panel with composite facing on its two faces used for buildings.

VERMASPHA®  is made of calibrated and exfoliated vermiculite grains by heat treatment and coated with bitumen.

XPS PROTECT ARTIC is an extruded polystyrene foam (XPS) thermal insulation panel for buildings, with a cement-based facing.