Alsan® 170 Primer

Alsan^® 170 is specifically designed for use on highly porous substrates. Alsan^® 170 is also used for pre-treatment (primer and barrier) of absorbent, mineral substrates with large pores and pinholes in preparation for the later application of Alsan^® PMMA resins.

Properties:
- Optimum filling of pores and pinholes
- Minimal run-off on vertical surfaces
- Very good adhesion on absorbent substrates
- Fast-curing
- Hydrolysis and alkali resistant
- Solvent free

Material:
2-component, fast-curing PMMA based (polymethyl methacrylate) scratch-coat primer, made thixotropic and filled with quartz sand. Alsan^®170 is unpigmented.

Technical data:
- Density: 1,37 g/cm³

Consumption:
- Smooth: 0.8 kg/m²
- Fine-sandy: 0.9 kg/m²
- Rough: 1.2 kg/m²

• Application equipment / tools:
  - Mixing of the product: suitable mixer (ex. paint mixer)
  - Applying of the product: smoothing trowel
• Substrate preparation:
  Alsan^® 170 must only be applied to a prepared substrate. Please refer to the appropriate application guide for information about correct surface preparation.
• Mixing:
  - First stir the tub contents thoroughly.
  - Then add the catalyst whilst stirring at a low speed for 2 minutes.
  - Make sure that all material on the side and base of the pot is mixed in.
  - At temperatures below 10 ªC the product should be stirred for 4 minutes as the catalyst will take longer to dissolve.
• Application:
  - Use a smoothing trowel to apply an even, film forming layer of primer.
  - Avoid creating any build-up of material.
  - Once the coating has cured, apply a second coat to cover any defects (bubbles, areas not fully coated).

Packaging: can of 10 kg (Alsan^® 170 is supplied without Alsan^® 070 catalyst).

• Store in original sealed packaging in a cool, dry and frost-free place.
• Avoid warm storage areas (> 30 °C) even for brief periods, for example on site.
• Consequently the products must not be exposed to direct sunlight or kept in a vehicle.
• Unopened products have a shelf life of at least 12 months.
• After opening, reseal the packaging so it is completely airtight.

EAN 13 - 10 kg : 3434550328487